Home / Key Products / Railways and Metro / Electric Panels
Electric Panels
Electrical panels are required for control as well as protection of various devices fitted in Locomotive, Passenger Coaches, Metro Trains, Train sets etc.
Certifications
AS-9100 | ISO-9001 |
ISO-14001 | ISO-45001 |
ISO-13485 |
Compliant Standards
IEC-60571 | IEC-60077-1 |
IEC-60068-2 | IEC-61373 |
IEC-60529 | IEC-61000-4-2, 3, 4, 5 |
LOCO Panels – Onboard (Auxiliary/Control)
Electrical panels are required for control as well as protection of various devices fitted in Locomotive, Passenger Coaches, Metro Trains, Train sets etc.
HB1 Panel
Auxiliary Supply Panels are used for controlling and protection of Compressor, Blowers, Light, Fan, Auxiliary Converter, Traction Converter and other related accessories inside the Locomotive. These consists of completely wired contactors, circuit breaker etc. and controls the input to several Auxiliary devices like Machine Room Blower, Compressor, Crew Fan, Cab Heater etc.
SB1 Panel
Control Panels are used for controlling and protection of Pantograph, VCB, Auxiliary Converter, Traction Converter, Central Electronics, Fire Detection Unit and other related accessories inside the Locomotive.
Filter Cubicle
The Filter Cubicle is used to reduce the harmonics in the catenary current. Line harmonic filter is connected with primary winding (self-inductance) of main transformer. This harmonic filter reduces/suppresses the high frequency harmonics to enable efficient energy transmission and avoid disturbances in signaling. Filter Cubicle consists of surge arrester, current sensor, contractor, capacitor etc.
Cubicle F
Interface Cubicle provides the connection between the Driver Control Desk and the Control cubicles SB1 & SB2. It transmits the relevant information of the action of the Loco Pilot to the Control Cubicles and displays fault / error signal received from the Control Electronics to the loco pilot.
METRO Application Control Panels – Onboard
Different type of Electrical panels like Relay Panel, EDB Panel, MCB Panel etc. are used in Metro coaches. Functionality of these panels also depend upon the
application i.e. Driver Car, Motor Car, Trailer Car.
EDB Panel
- Onboard mounted
- Closed box construction
- Easy to access devices
- Cable marker with transparent sleeve on all wires
- Fire retardant paint
- Compact 3-layer design
- Incorporates Safety critical Relays
- Customized design as per application
Relay Panel
METRO Application Control Panels – Underslung
In Metro Train, electrical control as well as power lines are required to be transferred from one end to the other end. For transfer of these lines, different type of Junction Boxes (LTJB, HTEB, LTEB, TMJB, SSJB, BCB etc.) are used in Metro trains.
LTJB
- Underslung mounted
- Closed box construction
- Easy to access devices
- Cable marker with transparent sleeve on all wires
- Customized design as per application
BCB
Passenger Coach Control Panels
Switch Board Cabinets are used in Passenger coaches to control and protect the various passenger amenities like coach light, air conditioning, water pump control, sanitary system control, public address system control, charging sockets control, pantry equipment control etc. Configuration of Switch Board Cabinet depends upon the type of coach e.g. Air-Conditioned coach, non-air-conditioned coach, Chair Car, Sleeper Car, Pantry Car, Power Car etc.
SBC 184
- Onboard mounted
- Closed box construction
- Easy to access devices
- Cable marker on all wires
- Fitted with Fire suppression system
- Customized design as per application
SBC 195
Smart Switch Board Cabinet consists of microcontroller and Touch screen-based LED monitor. All functions can be selected through touch screen.
- Onboard mounted
- Closed box construction
- Easy to access devices
- Cable marker on all wires
- 18” touch screen-based LED display
- Data logging & retrieval through USB
- Built in Mini printer
- Remote monitoring through mobile network
- Fitted with Fire suppression system
- RS485 communication interface
- Customized design as per application